Two Wire Fire Systems

Our cost-effective two-wire fire panel range comprises the following industry-leading products:-

  • The Twinflex 2-8 Zone Fire Panel and ancillaries by FIKE
  • The CFP AlarmSense 2-8 Zone Fire Panel and ancillaries by C-TEC/APOLLO

Both panels and their associated ancillaries (detectors, call points, sounders, sounder/beacons, etc) are certified to the relevant parts of EN54.

TwinFlex Pro 2-8 Zone Two-Wire Fire Panel & Ancillaries (FIKE)

Two wire fire panel
  • 2, 4 and 8 zone versions.
  • Revised panel enclosure for easier fitting.
  • Requires one 2 core screened cable for each zone to accommodate both detection devices and sounders.
  • Two monitored outputs that may be configured as conventional sounder circuits.
  • Volt free common fire and fault relays.
  • Two multifunction latching/non latching inputs and one monitored input.
  • Requires 2 x 12V 3.3 Ah batteries to provide up to 72 hours standby.
  • Easy to use 500 event log
  • Day/night mode.
  • Alarm confirmation and delay programming options configureable via keypad or PC
  • Optional conventional zone card available allows the panel to accept conventional devices on Zones 5 to 8.
  • Additional battery enclosure kit now available.
  • The panel's two-wire 'analogue non-addressable' architecture means it can recognise and separately identify smoke detector, heat detector and manual call point alarms AND monitor zones for head removal, device, end of line, open and short circuit faults.

TwinFlex Pro 2-8 Zone Two-Wire Fire Panel Wiring Overview

Two wire wiring diagram

CFP AlarmSense 2-8 Zone Two-Wire Fire Panel & Ancillaries (C-TEC)

Two wire fire panel
  • A powerful C-TEC manufactured two-wire fire alarm panel designed to work with Apollo's AlarmSense range of detectors, call points, sounders and beacons
  • Intuitive interface with colour-coded buttons and combined keypad/keyswitch entry
  • Available with 2, 4 or 8 AlarmSense Zone Circuits
  • Four conventional sounder circuits (for use with non-AlarmSense sounders/beacons) also provided
  • Integral 1.5A EN54-4/A2 switch mode PSU
  • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones
  • Two on-board relays (Fire and Fault) and two open-collector outputs (Remote and Reset)
  • 'Class change' and alert inputs
  • Expansion connections for up to eight two-wire repeaters and optional CFP relay boards
  • AlarmSense detectors, manual call points and sounders/beacons can be connected on the same two wires
  • Sounders can be wired to the same point as detectors
  • Zonal fire tracking and alarm indication
  • Reduction in wiring and installation costs

CFP 2-8 Zone Two-Wire Fire Panel Wiring Overview

Two wire wiring diagram


System Design Service

Sales & technical support

Free in-house training courses

Free point-of-sale display material

Competitive pricing structure

Next day & timed deliveries

Langley Mills, Roberttown Lane, Roberttown, Liversedge, West Yorkshire WF15 7LF

Please direct all sales enquiries to 01924 406449

or email us at

Visit our downloads page for a copy of our latest product catalogue.